Recently Updated Pages
How audio is routed
Understanding the path makes the four audio pages and Output Routing fall into place. A zone sele...
About this manual
This book is the software manual for Quest QXD amplifiers. It describes the web interface, the fr...
Troubleshooting and reference
Cannot open the web interface Confirm the amplifier is powered and the front panel is up. Wi-Fi A...
Front panel software
This page describes the Front Panel Display. Turn the encoder to move; press to select. Every lis...
Power management and GPIO
Power management Sidebar: Settings → Power Management Address: /#/setup/power Requires: administ...
Network
The amplifier can use Ethernet, a Wi-Fi client, a Wi-Fi access point, or a combination. Status pa...
Device, firmware, and backup
Sidebar: Settings → Device Address: /#/setup/device Amplifier Status Address: /#/setup/device/a...
Expansion routing and speaker library
Output Routing Sidebar: Settings → Output Routing Address: /#/setup/output-routing This page set...
Speaker outputs
Sidebar: Speaker Outputs Address: /#/audio/outputs Four amplifier channels, default names Output...
Mix bus and zones
Mix Bus Sidebar: Mix Bus Address: /#/audio/mixbus Four mix buses, default names Mix Bus 1–4. Cli...
Finding your way around
The web interface is a single-page application served by the amplifier. It works in a modern desk...
Connecting for the first time
A new (or factory-reset) amplifier starts its own Wi-Fi access point so you can reach the web int...
Control API
The HTTP and WebSocket control API is documented separately: QXD Series API Docs
Parametric EQ
User EQ is available on analogue inputs (5 bands) and speaker outputs (10 bands). Speaker presets...
Inputs
Sidebar: Inputs Address: /#/audio/inputs Three tabs: Analogue, Digital, and Generator. Analogue ...
Dashboard and meters
Sidebar: Dashboard Address: /#/dashboard The dashboard is the home page. It shows live level met...